Brother PE770 Computerized Sewing Machine "bobbin wind wont turn" Questions

...wind the bobbin on this machine. I recently pulled it out to sew again and now the machine wont wind thread onto the bobbin. The machine runs like its loading the bobbin but the dowel wont turn. make ...

...wind? The bobbin winder tire may have degraded so the motor is not reaching that bobbin winder shaft. Replace the bobbin winder tire and you may be set! (That was my machine's problem) Sewing Parts ...

...bobbin, and it wont wind. The thread never catches around the bobbin. The machine was refurbished 10 years ago, and has not been used since. HELP!!!! Pass the bitter end of the thread from the inside ...

and i think I do, but the bobbin still wont wind. HELP When you put the bobbin on the top spool, did you move the bobbin spool to the right? It will only work if the bobbin spool is moved to the right

...bobbin winder in the wind mode (metal that holds bobbin was pushed toward the right where it would be if I were winding a bobbin. It was sewing fine but did make a whining sound the last seam. Did I ...

...wont feed Sounds like you have a thread jam( bird's nest) inside your bobbin housing. Take the face plate off, remove the bobbin, and take the housing apart if you have to...then start all over with ...

...spindel to the right to engage bobbin fuction and the machine locks up and wont wind the bobbin. Irig did you bring it in for repair? I'm thinking its broke - which **** as mine is a brand new ...

...is that the clucth in the side wheel is engaged. If you disengage the clutch to wind a bobbin, ensure that you engage it again to start sewing. Hope this helps, otherwise it might be serviceman

...wind your bobbin at full speed. The thread wraps around the center of the bobbin too tightly and causes it to close tight around the winder. Most times if you take off part of the thread you can get ...