Question about Brother Sewing Machines
...the bobbin is inserted into the bobbin case correctly--if the machine won't pick the thread up from the bobbin correctly take the bobbinout of the case & turn it around & try it that
Bobbin thread comes out in a mass of threads I get the E6 error, the bobbin thread comes out in a big clump and the needle get stuck in the fabric. This is a brand new machine, and I'm not sure if I ...
...bobbin; thread still tangles after 2 or 3 stitches. HELP! In my Brother CE-4000, it appears as though the feed dogs (which you can change to a higher position or a lower position) are allowing the ...
bobbin thread, instead of looping, the top thread keeps getting stuck in the machine stuff in the bobbin area. and when i FINALLY get the thing to go, it immediately gets jammed. WHAT's HAPPENING?? Go
Question about Brother Sewing Machines
...thread is entering the bobbin area, getting stuck on the spring, and causing it to bunch inside and knot. Any ideas?? I don't know if this is any help, but I would suggest taking it in to a repair ...
...bobbin thread, the top thread tangles or gets stuck & will not pick-up bobbin thread. have cleaned bobbin area . are there any instructions i can download & print for my machine? Thank You, Danielle ...
...bobbin thread up from the bottom the top thread gets stuck around the bobbin area. gets tangled wont pull thru You might have a bad bobbin case. check for any burrs on the bobbin case, and replace it ...
Question about Brother Sewing Machines
...bobbin thread for embroidery. My tension is set at about 2-3, because anything tighter seems to make it worse. I am using a Size 15 bobbin, but not necessarily the one that is made for a Brother ...
...it's the BOBBIN thread that's not threaded right. If it's a front loading bobbin, the thread should go over the top of the bobbin to the right before placing it in the bobbin case. Hope this
Question about Brother Sewing Machines
...bobbin, the thread slipped under the bobbin seat and got stuck. I can't dislodge it, and my bobbin won't thread. How can I fix this? Thread is stuck under the bobbin seat. There is a lot of thread ...
224 questions posted
Usually answered in minutes!
764 Questions
337 Questions
294 Questions
223 Questions
181 Questions