Stoves 600GR Gas Single Oven "set 350" Questions

Ad

set oven for 350 and won't climb past 177. funny set oven for 350 and won't climb past 177. funny part is it was working last night The oven probably got switched from showing degrees Fahrenheit to ...

Ad

...set the dial at 350.  When your oven reaches that temperature it beeps to let you know.  Some cooking directions tell you to preheat your oven.  In that case, when you set the dial to ...

Ad

...is set to 350, it only gets to 300 MAYBE THE SCALE IS DISADJUSTED?
Do you get 350 when you raise to 400? If do, don't worry, use it, knowing that 400 is actually 350.




Question about Kenmore Ovens

1 Answer

...set for 350 but was 500 degrees in oven according to thermometer. Then sometimes you set it for 350 and it will get to almost 350 and then start cooling off. From the symptons you describe, I would ...

...set a temperature higher that 350 degrees. Electric oven. For example, i will punch in 425 and the panel will default back the temperature to 350. 350 will be the design max for your oven unless the ...

Question about Whirlpool Ovens

1 Answer

350 degrees I set at. Try to set it at 500 degrees and see if it goes off at 350. If it does, then it probably needs calibrating. You can calibrate it by taking the knob off and finding a set screw in

...Set to 350 it will heat up and say it is 350 and then test at 275. Increase it to 400 and it will shoot up to 475. The next time the settings will do something completely different. What is the model ...

...Set Temp Actual Temp 300 275 350 325 400 350 450 400 How to correct this variation? If it is new contact the people that sold it to you for warranty repair. If not Just set it higher, that is a lot ...

Question about Frigidaire Ovens

1 Answer

...350. If I set it to 350 and wait, it doesn't heat to that temp. Good Morning Friend, I understand that your Frigidaire oven will not heat to temperature if you set it to 350 degrees. I see that you ...

Question about Whirlpool Ovens

1 Answer

350 as you stated is a default set point that you see before you start the cycle. What you should see afterwards (start bake) is the current temperature - which would normally be lower than the set or

Not finding what you are looking for?
Stoves 600GR Gas Single Oven Logo

17 questions posted

Ask a Question

Usually answered in minutes!

Top Stoves Ovens Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

vince

Level 3 Expert

2530 Answers

Are you a Stoves Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...