ASUS M4A78LTM LE Motherboard "4gb sdram" Questions

4GB module Max Supported Memory 4 GB Supported RAM Technology DDR3 SDRAM Supported RAM Integrity Check Non-ECC Two 240-pin DDR3 SDRAM Dual Inline Memory Module (DIMM) sockets Support for DDR3 1333(OC)

...use is 4Gb in total (so 1Gb stick in each slot would be fine - just make sure you match them in pairs). Maximum of 4GMaximum of 4GB of DDR400/333/266 SDRAM with ECCB of DDR400/333/266 SDRAM with ...

...sticks of 1gb is unbuffered. This is the memory specs for your board 4 x 184-pin DIMM Sockets support max. 4GB unbuffered non-ECC PC3200/2700/2100/1600 DDR SDRAM memory Dual-channel memory ...

...SDRAM Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows?32-bit OS. For Windows?64-bit OS with 64-bit CPU, there is ...

4GB( too bad) here is the techical specification of your board 184-pin DIMM Banking: 2 (2 banks of 1) Graphics Support: PCI Express x16 Chipset: ATI RC410 IGP Error Detection Support: Non-ECC only Max

...SDRAM, I have found 2x4gb Hynix DDR-2 240 pin 800Mz 6400P sticks. or can you tell me what 4gb sticks will work. "P" stands for "parity" and "E" stands for ECC (Error Checking & Correcting) To ...

...memory interface Supports up to 4GB system memory Supports DDR266, DDR333 and DDR400 DDR SDRAM DIMM BIOS Award BIOS CMOS Reloaded CPU/DRAM overclocking CPU/DRAM/Chipset overvoltage 4Mbit flash ...

...SDRAM The memory needs to match one of these numbers so: DDR200 DDR266 DDR333 one of these types will work This motherboard will support a maximum of 4GB of memory. You need to check the ...

need to increase ram but don't know how to find out how much board to support or what type. Accessories included: i/o shield and cables only- no manuals or cdDFI CM33-TL/G Socket 370 Motherboard Intel

...4gb ram 1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts Unbuffered, single-sided or double-sided DIMMs with the following restriction: double-sided DIMMs with x16 organization are not ...