Euro-Pro NV22 Shark Navigator Bagless Upright Vacuum "remove small wheels" Questions

...small plastic finally you can remove that nosey plastic watch carefully about part you take out good luck any problem mail me: hs_milani[at]yahoo[dat]com Not sure where to lever with the large ...

...the hard floor. The small skid plate is dragging, scratching the floor. The small wheels don't seem to be engaging. Clean the bottom plate, remove the wheels and clean if they will not spin ...

Remove the small screws on the bottom of the powerhead. On some models there are 2 hidden beneath the rubber wheels in front. Just pop the wheels out with a flat blade screwdriver and remove those two

...To remove, slide a small flat screw driver under the wheel plate and then slide off. You can view item here... 40 mm Dolly Wheel Plate ...

...to reconnect the cable In the centre of each wheel there is a different colour plug. This must be removed before the wheel can be pulled off. I used a small screwdriver to prise it out. You will ...

...Insert a small standard screw driver in the gap at the right or left and this ball wheel can be pried out. Then remove all the hair wrapped around and into the axle. Pop back into place when

...remove brush to clean off wound up stuffl. You can view the manual (a page at a time) here: Shark Navigator Lift Away NV351 26 Owner Manual Cleaning The Post motor... But it looks as though they ...

...small screwdriver to remove the headlight lens covers, remove both of the light bulbs, and then the two screws are under the lights. there MAY be 2 more screws again at the back of the unit above the ...

...remove the handle, you will notice there is one larger black Phillips screw under the black plastic strip. Engage the wheels and loosen that screw. Slide the lower handle part back and forth and you ...

...other end of the belt fits on a small wheel about 4-5 inches back from the brush.There may be a small plate over the belt and wheel if so just remove it and you will see what I am talking