eMachines ET1641-02w (PT.NA60X.001) PC Desktop "power" Questions

came home to find it off, tried to power up, fan runs 3 seconds, no power light, then off Try first to unplug the power cord at the back of the CPU then press the power button for 5 seconds while the ...

emachine ET1810 is not powering on already replaced the power supply You may have a bad Power On switch. The Power On switch is located inside the plastic Power On button. This is a generic ATX power ...

no power will not power up, cord good A) Power On switch is no good B) Power Supply is no good Do you wish to perform the simple test, to see if the problem is the Power On switch, or Power Supply? If

Why computer will not power up Pluged in the computer does not power up You probably have a bad power supply. An easy way to tell is if you plug another device (any electrical device will do) into ...

died. nothing comes on, so not dead drive. switched out power supply, so not dead power supply. the switch on the front - blue led only comes on when plugged in lower right two prongs of 8 (4x4). So, ...

PC power down after 3 seconds power on. Power PC power down after 3 seconds on power-on even after all peripherals, external connectors that can possibly affect the motherboard were all removed. Power

i have emachine ET 1641-02w check the power supply and its check out ok but computer wont turn on I will assume that you have not messed with anything and it just stopped working. So try these steps: ...

no power to pci-e and usb ports if you have a volt meter, take the negative lead and place on a black/neutral pin in the PCI-e cord. Then take the positive lead and check all colored pins (typically ...

My Computer Doesn't Turns on when i press power button, the only thing that starts are the fans and thats it, no Power light or stuff like that. TRY WITH A OTHER PSU. Check your RAM and your power ...

Computer will not power up When turn off the system, the windows update indicted do not power down, system will close out when updates are completed. Returned later in day pushed the power on button ...