Question about Canon PIXMA Office Equipment & Supplies
feed at back of unit (normal paper feed direction) on the side that's obstructed and look in the unit to see where the paper enters. Then use card stock or thicker paper in reverse direction
...39;t take the paper. It just slightly pulls it, but then sends it back to the beginning. Then it says there is no paper available, but there is. Hi Rosa,There was a paper jam and you cleared the jam, ...
...39;t already, take your blank paper out of the feed slot.6> Use your flashlight to look down the slot where your blank paper was.7> Look all the way to the right, where the bottom of your paper ...
Question about Canon PIXMA Office Equipment & Supplies
...paper feed it's not taking the paper in and it is making a treble noise like gears grinding I've looked to see if something has fallen in to it like a staple or paper clip unable to ...
...39;paper jam error' appears once again. You must check carefully to make sure all paper is removed, even little pieces that may have been torn. Use a flashlight and check very carefully in the ...
paper doesn't advance. Using a different paper stock or resetting doesn't work. hello,maybe the paper feed is jammed try to see if it has something that stops the paper to go in and if you are
...39;t grab & feed the paper properly), here is a trick I developed years ago. You'll need a couple of pieces of heavy card stock (110+LB), and a can a Duro Brand adhesive spray (DO NOT use ...
Question about Canon PIXMA Office Equipment & Supplies
...39;t seem to help. This seems to be fault in the transport of the paper in the rollers. So if you have used any adhesive sticker printing, it is possible that some glue has got clogged into the ...
paper jam. I've checked but nothing seems to be lodged. The paper just won't feed. I've up-ended and shaken the printer but nothing seems to be causing any obstruction. help please HiHere&
...paper. It'll feed about and inch and a half of paper and then stop showing a Paper Jam. 85% of paper jams are caused by worn rollers . The rubber treads in the rollers wears down, making them ...
179 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
