Canon PIXMA MX330 Multifunction InkJet Color Printer "160 feed problems" Questions

feed at back of unit (normal paper feed direction) on the side that's obstructed and look in the unit to see where the paper enters.  Then use card stock or thicker paper in reverse direction

160;line feed error, with the problem originating from the timing disk film or the printer's logic board.To solve this problem:Check the timing disk film or Check the feed roller if

feed on the canon pixma mp 160 but when i try to print or copy, paper doesn't continue to feed and I get an E message. any suggestions The feed rollers could be dirty. They are not advancing the paper

feed back from other helper ..i try to find if  any piece paper stuck inside or any  then i was thinking the problem is mechanical from inside because i dont hear any clutch jumping or other

...two rollers in the printer to feed the paper in, if one of them brakes can cause this problem, Changing  the roller will fix the problem.Hope this helps, please rate and leave a comment,

...160 printer with an alarm E-2 flashing - I have followed the steps to troubleshoot this but nothing works. hi, CANON PIXMA MP160 All-In-One InkJet Printer has few common problems. Such as Driver CD ...

...?3/ Have you updated new firmware lately ?- If not : try to update it to new firmware ..better yet , delete it and insatll a new one ( go to canon site )please feed back .. see if it wworks

...Feed Unit  3.Logic Board solution :Switched it off, opened the lid and manually slid the cartridge-tray to the left.used a piece of tissue to clean the base-pad where the heads are stored.Remove ...

160 - any suggestions on how to get get rid of the message. I did recently clear error E27 with no problems - is there any way it could be connected to this new error message - although I have printed

...feed roller is located.  Did some research and found numerous people discovered foreign objects inside their printers.  Since I had tried numerous other solutions, such as maintenance ...