Question about GE Washing Machines
...burn rubber, i just replaced the motor...it was doin the same thing and stop workin so thats when we replaced the motor and it started again... any solutions pls The belt could be worn and will be ...
...SMELLED A BURNING ODOR AND THE MACHINE STOPPED DURING THE WASH CYCLE. CAN YOU HELP? The burning smell is from your coupling and when this breaks the rubber spins across the plastic face of the ...
winding sound, with a smell of burning i have a indesit front load washer, i turned it on all i get is the water not loading but a winding sound and smell of burned rubber. I stop the washer and find ...
...cycle. It sits for a while then starts working again. You can smell like a burning rubber smell when it is stopped. Overheating? sounds like the belt may be starting to slip and if not its the ...
...smelled like hot rubber. Is there a filter to clean in the washer? The burning rubber smell is probably the belt. It is probably broken into. Remove the front of the washer on a top loader to access ...
Question about Frigidaire Washing Machines
...burn Then tried to spin the shafts and it would not spin forward but it spin backwards Hello Todd, thank you for your post! From my understanding your Frigidaire washer made a loud noise then stopped ...
Amana Washer - NAV5800AWW fills with water, but will not continue through the cycle. I hear a humming noise, then a clicking down near the motor, then it just stops. Also smell a slight burning rubber
Question about Whirlpool Washing Machines
Kenmore washing machine stops and there is a burning smell My washing machine will run for one or two loads and then it stops. It produces a burnt rubber smell. After a while it will run again. I ...
...stopped rotating at end of cycle smell burning rubber There are two likely reasons for the rubber smell - either the drum belt has melted and snapped or the drum seal has rubbed too much and melted. ...
...stopped working If it is a burning rubber smell, the drive belt from the motor to the transmission may have failed. Remove the rear panel to access (you may have to remove the top first-- push in on ...
466 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions