Kenmore Elite 21086 "washer knob stuck" Questions

washer keeps getting stuck in all cycles If you suspect you have a defective timer it can easily be replaced by performing the following steps: 1. Unplug washing machine... and pull out the timer knob

...washer or cushion and lean it against the wall to access and remove the screws more easily. Drain the water into a bucket or shallow pan and lay a piece of towel under the pump filter prior to the ...

...washer or cushion and lean it against the wall to access and remove the screws more easily. Once the panel is off, remove the filter by turning the knob counterclockwise. Clean the filter from any ...

...washer or cushion and lean it against the wall to access and remove the screws more easily. Once the panel is off, remove the filter by turning the knob counterclockwise. Clean the filter from any ...

...washer plug in. Dorr shuts fine and the soap dish shuts fine. Whren set to wash and knob pulled out nothing happens. The machine seems dead. It appears your timer/main controller has failed in this ...

...washer.( bail it or wet dry vac). The pump has a large knob on the front of it. Unscrew it (counter clockwise) and pull out the screen. I found one of my wifes knee high stockings in it. All fixed ...

...washer and it sounds like there is water stuck somewhere in it, but it is not in the clothes chamber! What do I do and can I fix this myself as I have very little money! PLEASE HELP and tell me what ...

...washer knob popped out the washer knob popped out and it will not go back in its sort of stuck take knob off again and look at the stem where the knob goes does it have a round side and a flat side? ...

load size knob when I was resetting the load size. It cracked the inside of knob. Now I cannot adjust the load size. Thanks for the helpful tips, got my stuck washer knob fixed , all by myself woohoo!

The metal knob stem on a GE WCSR2090D is stuck in the broken knob. I saw replacement knobs, but what about the metal stem that used to hold the knob? Thanks! You will have to replace the switch.