D-Link DIR-300 Wireless Router "pptp passthrough" Questions

...pptp passthrough) PPTP is also using GRE protocol. GRE is a level 4 protocol (IP protocol number 47), just like TCP (IP protocol number 6). First, in your WBR-2310 configuration, make sure that ...

will allow authentication and remote access into your network. The router will also allow you access remote PPtP networks from behind the router providing the PPtP Passthrough is enabled on the router

...PPtP Passthrough is enabled on the router. can you show me a viedo how to hook up a zonet router of a cable/DSL boardband router cause i have problems losing internet cause when i download world of ...

...PPTP Passthrough:EnableDisable L2TP Passthrough:EnableDisable is it possible that DSL router needs you to add the rmote network to your trusted networks? solved the problem. Had to set DSL modem to ...

...PPTP VPN Passthrough which it sounds like you've already done this. I've run into some ISP's that block VPN connections out of their network. If you have the ability, try to directly connect your ...

passthrough and forwarded the port to my server. When I try to connect I am able to put in the user name and password then I receive a pptp connection error. What am I missing? not a solution, - but I

NBG-417N is equipped with firewall features including NAT, Stateful Packet Inspection (SPI), Denial-of-Service (DoS) and VPN Passthrough (IPSec, PPTP, L2TP) to prevent attacks coming from the Internet

...PPTP passthrough" and "IPSec" are enable. However it doesn't work. Is there other setting I could do to setup? The router's PPTP passthrough and IPSec settings assume that you're ...

...the VPN Passthrough sub-tab. Cisco VPN's usually use IPSEC, so enable the IPSEC Pass-through and click "Save Settings". If this doesn't work enable the PPTP Pass-through as well and give that a

passthrough so you shouldn't need to configure anything in the router itself. It may be necessary to open a few incoming ports but only as a last resort. Would you also reply to this post and specify.