Kenmore 98702 Stacked Washer/Dryer "heating element stacking" Questions

...make sure it not stop up because if in line fuse is open stop up filter and pipe that blow air out side will cause the heating element in fuse to open up. And check for lose wire going to element

...heating element in the dryer isn't heating up. The the heating element in the dryer of my Sears stacked washer/dryer is not heating. Is there a reset button somewhere, or does the element need ...

heating element?? I would check heating element also on the heating element box is a thermostat probably need to check that also take the wires off the heating element and use an ohm meter to check it

maytag neptune stacked MLG2000AWW wont heat blows fine but will not heat up. It appears the gas does not kick on It's either the fuse, heating element, thermal cut-off or thermostat

heating element is defective. Heating elements are irrepairable. If yours has ceased to function properly, you will have to replace it. Open your dryer's cabinet and locate the heating element so that

...heating element in stackable Kenmore model 417.98702891 Can anyone tell me how to replace the heating element in this Kenmore stackable dryer. I have the coil heating element, just don't know how to ...

heating element, a bad thermal fuse, or a brake in the wiring. Solution Check the house voltage for 220-240 Do a continuity test on the heating element. Do OHM reading on thermal fuse. Check wiring to

heating element and/or fuse located. I don't have model #. Unit is at another location Make sure you have 220 volts first at dryer. Heating element is on back of dryer. You'll need a test meter to see

...heating element. They are pretty cheap and almost as easy to change as an ovens element. Most times they are cracked and easy to tell if broke, otherwise could be a computer issue. Heating element ...

Stacked dryer will not heat? Possible failure of the heating element.click Element