Kenmore Elite 45986 Front Load Washer "second spin cycle works" Questions

...cycle can start I had the same problem. If you will hold the "Drain & Spin button" in for approximately 4 to 5 seconds it unlocks the " Control Locked" issue. i just had the same problem, to fix it ...

...spin cycle of second load. Loud high pitch sound during spin, so had to turn off. Did something come loose, or put in wrong. Also a plastic smell. The clutch is likely failed again - or the coupling ...

spin cycle that doesn't work. It does everything else fine. Sometimes if we cancel it and restart it it works. Kenmore 110 4996 Use And Care Manual Troubleshooting "F" Variables [other than FH and F02

SPIN cycle. Select NO SPIN by pressing the SPIN SELECT button, as needed. Push Prewash Option button four (4) times within five (5) seconds. C:00 will show in the display. NOTE: If Model does not have

cycle with about 2 min. remaining it shows the letter f I think it is for failure- just continues to beep nope its about to finish with load I finally unplugged it for a few seconds, was able to pause

...second pump be bad? Anyone know?? IS this why there was a class action lawsuit against the manufacturer?? i had this problem once...either its the timer u turn manualy or the bottom of the big round ...

spin cycle. The washer now has the Control Locked light on and I can't get it to turn off. I have unplugged the washer and turned off the breaker hoping that would reset it but it hasn't worked. I don

...spin', shd unlock OR Try holding the "end of cycle" button down for 5 or 6 seconds. You must hv done it accidently, it is the child lock device. Pl. rate if helped. I have the same problem on a brand ...

...cycle. HELP!!! School starts in two days!!! First of all, make sure haven't inadvertently locked your control panel. Press and hold the DRAIN/SPIN button for 3 seconds to see if it clears. How long ...

...CYCLE SIGNAL button for 3 seconds. Kenmore Elite Washer - Press and hold the DRAIN/SPIN button for 3 seconds. Kenmore Elite Dryer - Press and hold the AUTO DRY LEVEL button for 3 seconds. These ...