Kenmore Elite 45986 Front Load Washer "little couple show cancelled" Questions

little bit and now it is giving me a SUD in the same window! What the heck is this machine trying to tell me?! "F2" is a Long Drain error code, which indicates you are having a problem with either the

...little is getting pumped out If you experience a problem where the washer does not drain properly or the drain pump makes excessive noise, here's the information you need to check the drain pump: ...

...little screen that i need to clean is. If you experience a problem where the washer does not drain properly or the drain pump makes excessive noise, here's the information you need to check the drain ...

...little pressure sensing hose.  That is what solved my problem - working like new again.  If you know the pump is pumping water effectively, try this (access through back panel - took 20 ...

...little off to me, and occasionally several attempts to close it are necessary to keep it closed. I also notice that there is now a bit of water that has found it's way into the "window" in a place ...

...little way and see if the washing machine will start properly. Push start switch may need to be tested with a multi meter for continuity OHMS should show a closed circuit when pushed in or turned on. ...

...LITTLE BIT BUT WILL NOT GO THRU THE WHOLE CYCLE BUT MY WASHER DOES NOT FLASH IT JUST DOES NOT DO ANYTHING ALSO I CAN START A LOAD AND IT WILL START OUT FINE BUT THEN ABOUT 15 MIN IN TO THE WASH THE ...

...little to no callbacks. Sometimes it is better to call a reputable service company and pay for expert repair. It is irresponsible for a tech on the net to tell you change a $200 control unit without ...

...little longer If you experience a problem where the washer does not drain and the drain pump does not run at all, here?s the information you need to replace the drain pump: Symptom: PUMP IS NOT ...

...little wet. With all that I did I can't say what exactlly worked except Prayer. I would excluded the actual door lock mechanism. I thought with us manually unlocking the door we may have jammed the ...