Kenmore Elite 45986 Front Load Washer "drain hose drawing" Questions

...drain hose and make sure it is not plugged or kinked. Check Wire Harness connectors to the Drain Pump, Pressure Switch, and Central Control Unit (CCU) Check/Clean Drain Pump Filter of foreign objects ...

...drain hose and make sure it is not plugged or kinked. 2. Unplug washer or disconnect power. 3. Check wire harness connections to the drain pump, pressure switch, and Central Control Unit (CCU). Duet ...

...drain hose and make sure it is not plugged or kinked C. Check Wire Harness connections to the Drain Pump, Pressure Switch, and Central Control Unit (CCU) D. Check / Clean Drain Pump Filter of foreign ...

drain hose and make sure it is not plugged or kinked. Check the electrical connections at the pump and make sure the pump is running. Check the drain pump filter for foreign objects. If the above does

...drain hose and make sure it is not plugged or kinked. Check Wire Harness connectors to the Drain Pump, Pressure Switch, and Central Control Unit (CCU) Check/Clean Drain Pump Filter of foreign objects ...

drain. Check for screens at the hose ends as well as where they attach to the machine to see if they are simply clogged with silt. If not, the valve assembly (which is part of the fitting to which you

...drain hose...NOT. After they left, the problem still exists. F28 error - no idea what that is. Water is on and both hot and cold are working. Washer sprays water into detergent well, locks door and ...

drain hose from the washer which drops into the pipe the plumber provides. It is important that the drain pipe allow air to move past the washers drain hose, to allow proper draining. Hope that helps.

...drain hose where it goes into the drain is higher than the console of the machine. Also make sure it only goes 6 to 8 inches down into the drain. I this is already the case, they make a siphon break ...

...drain hose from the washer where it goes into the wall drain, make sure the hose from the washer is only about 6 inches down into the wall drain. If it was down any farther I will create a SIPHON ...