Kenmore Elite 45986 Front Load Washer "dl fix top" Questions

...DL = Door Latch. i am guessing you hear 6 clicks (processor trying to latch door) then the error. while i was poking around inside the unit i found a service manual inside (behind the bottom cover, ...

...fix our problem. Our 3-year-old Kenmore Elite H3 would not start on any cycle. It kept flashing the error code "dL/F", which we found out means "door lock failure." Taking advice, we unplugged our ...

...DL codes before this happened. We have figured out how to get the bottom panel open, but not sure what to do next. Please help! Thanks in advance if you know how to fix this. with panel off reach up ...

...dl f? Any ideas - thanks Fdl is a code that indicates a door lock error. This error occurs because the door cannot be locked. The door will try to lock six times before displaying the error code. You ...

...DL code on every wash and now we have done several loads and not one error code. The best thing is we didnt spend any money to fix the problem. read this here hope it helps. Another person had the ...

DL means the door lock. If you take the bottom panel off (there are 3 screws), you can reach up and pull down on a lever to release the lock. Next you need to take off the top of the washer (there are

...dl F signal. washer is not working at all.What is the problem and how do I fix it? Thanks for your help. Hi Thanks for using FixYa. Error “dlf” means a door latch failure. This means that you’ll need ...

...fix for you. I hope this helps. the dl failure code is a door lock error and you also might be getting a f 11 code, which is control failure. You will need a (ccu) central control unit. There are 3 ...

...top. Look in the back middle where all the wires connect to a CCU (central control unit). 3.Find the large blue wires along the right side of the CCU, then go immediately to the left to the first set ...

...fix is permanent. Thanks for all the great info here. I had the same problem--dl/f code, clicking from back of washing machine. I opened the top and pushed in all the wore connections, but it didn't ...