belt slipped off machine my belt slipped off my washing machine and i am not sure how to put it back on. the machine fills up with water but it wont agitate rotate pulleys while trying to reinstall ...
The belt, on my Kenmore Elite HE3, will not stay on. It keeps slipping off so then the tub will not spin. Is it missing something that holds the belt on the wheel? Hi from retired Englishman in SW ...
won't spin won't drain - needs a new belt washer won't spin won't drain - needs a new belt - can't get info on other sites to order a replacement belt ASAP. I have seven loads of laundry waiting and ...
Slow Spin Rate Washer spins very slow ok " sounds like belts are slipping, readjust or replace belts adjustment bolts on motor will tighten belts
how do I replace the belt? Washer is full and can not remove water hoses pull it out about a foot or two away from back wall and just tip it backwards. remove two bolts holding belt guard off and slip
Did i loosen the belt or break the belt ? i think i caused this problem myself, i put a too large comforter in to wash and it fit without a problem, but in the cycle the noise started, the ...
Makes loud noise during the spin cycle. The drum move back and forth by hand. no loud noises water will drain, just belt broke plastic piece needs to come off so I can replace belt.
...frozen pulley or a broken impeller. If that's the case replace the water pump. Note: if you have a belt driven washer, check the belt(s) for cracks, as this would be a perfect time to replace the ...
...Test the timer control Test the lid switch (some models) Inspect the water pump Inspect the drive belt (belt drive only) Inspect the motor coupler pls rate my
4,938 questions posted
Usually answered in minutes!
1,023 Questions
0 Questions
69 Questions
45 Questions
20 Questions