Kenmore 63942 Dryer "whats wrong drum goes" Questions

...what is wrong? Thanks. check the belt that goes around the drum to be correctly mounted at the motor area also inspect the rollers that hold and turn the drum That model only goes in one

...wrong? The way the belt goes back on is, as the belt comes off the drum has to be doubled (pushed together to form a loop) and goes under the idler pulley then to the motor. While you have the drum ...

...wrong? I just replace a bad heating element yesterday. You probably need to check your dryers drum glides Reach inside and try to turn the drum. It should be VERY easy to turn. If it seems stiff it ...

my dryer makes a noise but dont spin around whats wrong the drive belt is brobably broke and you will have to replace it.it goes around your drum and to the motor.

makes a loud scraping noise when it's turned on....what is wrong? If it was put on a dolly from the back or dropped on the bottom the blower housing could be in contact with the drum as it goes around

go bad.. I have one that got a penny stuck bewtwwn the drum and the seal and that was all that was wrong.. pull the dturm and see what you find.. rollers are cheap.. replace the belt at the same time.

...drum turns, dryer heats but does not dry? what am I doing wrong. will only run about 15 - 20 minutes and the buzzer goes off but the clothes are not dry. make sure your vent is clear from dryer to ...

...wrong? Thanks The belt can be replaced as follows. 1 remove top and front of dryer shell 2 belt goes around drum around motor pully then under tentioner wheel 3 replace front and top of dryer (top ...

...wrong with a tumble drier that doesn't require the removal of the drum and because the appliance is more compact than it should be, the drum can't be removed until most of the casing has been ...

...wrong when the dryer is working and it smells like burning rubber? Hi decolwell... Your belt is slipping and burning...going to break on you soon, time to change it. Follow the directions below and ...