Kenmore 63942 Dryer "clothes stops release start" Questions

...clothes dryer stops spinning when I release the Push to Start button. It seems to be running normally until I release the Push to Start button, that is to say, as long as the Push to Start button is ...

dryer stopped working in mid cycle. clothes were warm. if u hold start button down timer ticks but stops when u release start button motor is weak and over heating and shutting off,sorry no fix-mike

...clothes only w PTS held on. When button is released, dryer stops. Bad PTS? Bad EC assembly? Bad sensor? push to start button needs replacing,sometimes you can jump that out if you have another switch ...

...stops immediately after you release the button. Kenmore 110.63942101. I looked up the switch on the sears site and ordered it ($8 bucks plus shipping). Is it possible this will fix the problem or ...

...clothes dryer, Maytag PYE2300AYW starts when I hold the button in, but will not stay started. It happened after moving it to a new house. The dryer venting is working as I can see and feel the air at ...

clothes in the drum. The Reason is because since the Red Heater Element Wire Contacts were Welded together in the Motor Plug, when the Centrifugal switch on the motor shaft would release the switch it

...stops. The manual troubleshooting guide makes no reference to the display making one large rotating circle. Why does my dryer want to do this at the 1 minute mark? This is happening when you selected ...

...stops. The end of cycle chime sounds. The timer ticks. Placed all controles in every position and the results are the same.If you hold the state button the dryer runs till released. Marty Owens ...

...clothes I push the start button and it starts to run, but stops as soon as I release the button. I've been told the dryer must be off for at least 10 secs and this has worked in the past, but doesn't ...

...stops. If you hold the switch in the start postion it heats and dries cloths. When I test the connections on the back of the switch, the brown wires have power and the red wires only have power when ...