HP Officejet 6500 Wireless All-in-One InkJet Printer "remove tape cart" Questions

...remove the black cartrige, check if u removed the plastic protection tape then try to clean manually the print cart. with soft cloth when cleaning.. a black ink should apear on ur cloth if not change ...

...Remove/Check Left Cartridge? I cannot fix this error message that has me stuck. I found some info on the net that I tried (clear taping up certain metal spots on the cartridge plates itself that ...

...cart .. Read on and see if any applies to you. Check that you removed the protective tape. some cartridges have two of these pieces of tape one over the head and possibly on on the contacts to the ...

remove the protective tape from the bottom of the cartridge. Even if you have removed the tape, there might be some residual tape left at the bottom of the cartridge. I would suggest you check out for

...remove tape. There is no tape? ? Most carts come with tape covering the print head. Did you remove it? If so, look at the contacts on the cartridge and make sure there's no debris or dirt. Other than ...

...remove tape from cart when trying to print alignment page. Have use these carts before with no problem. Already exchanged on set @ office depot. Is this a cart or ptr malfunction? Thanks. Try using ...

remove the tape from the cartridge. Any ideas? There will be blue tape when turn the cart upside down please remove the the tape ...and check there no tape :if the printer states the same error remove

is likely empty, too. If it's a new one, take it out, and wipe the contacts off (also, some HP carts have tape across the contacts when new, and you have to remove the tape before installing the cart.

...cart. Many ink carts have a piece of tape over the contacts or over an air breather hole. This must be removed before installing it. Some printers have delicate contacts that can be bent or broken if ...

...remove and check colored ink" The cartridges comes with the protect tape at the bottom please its removed, if removed please clean the copper contacts with dry tissue , if you get the same error ...