HP Officejet 6500 Wireless All-in-One InkJet Printer "cartridges appear damaged" Questions

cartridges appear to be missing or damaged I get an error one or more cartridges appear to be missing or damaged. I have replaced my cartridges 3 times with not help. I cleaned the contacts, check the

...cartridges appear to be missing or damaged. nk cartridge problem! The following ink cartridges appear to be missing or damaged even with the ink cartridges installed correctly in the printer with ...

...DAMAGED. I have followed directions for troubleshooting on the HP website which i read to go to for help...no luck...I TURNED IT OFF...CLEANED PRINT NOZZLES...UNPLUGGED IT...I hope you can ...

cartridges appear to be missing or damaged I just replaced the ink cartridges and it was working fine then all of a sudden, there's that message and printer will not print. Either the cartridge is

Printer cartridges what is the right size printer cartridges for the hp officejet 6210 all-in-one and why does it always tell me to remove and check color cartridge. I do this, and there appears to be

...damaged'. I've been having the same problem every time I replace cartridges and have contacted HP Support who advised me to do resets, which initially appeared to be successful. Tonight I had a ...

...cartridges appear to be missing or damaged <yellow>. The first time this happened, I called HP's Help Desk and ended up getting a new cartridge cradle. The last time it happened, I swapped ...

...cartridges are not entirely empty, so if ink begins to emerge from the hole, or starts leaking from the print head, just extract a ml or two, wipe the cartridge with some tissue and voila! Now don't ...

Error message "remove and chech color cartidge". I removed and replaced it several times and the same message appeared. I used a new cartridge and the same messade appeared. What can I do now? you ...

...appear to be missing or damaged. refer to print documentation' i dont have the print documentation! it shouldnt be damaged as its brand new...? No it should not, Did you try to clean the print head.. ...