Question about Mitsubishi Televison & Video
...1 min. and then blinking light turns off, After the blincking light turns off I then try and turn on the set from both the remote & front panel buttons, but the set does not come on, Green blinking ...
1. The red light will blink twice . 5 Now slowly, alternate between POWER and TV, over and over, until your television turns off. You may have to press these keys many times (up to 150!), so please be
Question about Philips Televison & Video
...1 green light blinks on a front board 2 green lights blink then goes off no picture or sound These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time ...
...blinking power light is actually a diagnostic of a faulty part inside the set. Here is the diagnostic info and which part you need to replace. 1 blink STV 5v sense DG Board 2 blinks 15v SOS D Board 3 ...
...1 red flashing on (Main board) These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section ...
Question about Insignia Televison & Video
...blinking and it won't turn on! I would unplug it, give it a day to drain off the capacitors and then plug it in again. Maybe it will g back to normal. Sounds like the ten or 13 blink "*****" code ...
...blinking light standby mode? If so is the remote required to de-activate standby? It also clicks when turned on, and a green led lights up on 1 of the sust. boards, I think...please help! How many ...
...until the red light blinks twice, then release set. 2. Enter in 9 - 9 - 3 (The red light will blink twice after the 3). 3. Press and release the digit 1 (The red light will blink 4 times after the
75 questions posted
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions