Mitsubishi WD-73737 73 in. HD-Ready TV "hdmi port" Questions

Ad

1, 2, 3 and 4...which port do I use? Are you sure you have four hdmi ports? I have only one hdmi port and three usb ports. Be sure you are connected to the hdmi port and for some reason not a usb port

Ad

Question about Televison & Video

1 Answer

...hdmi port on my Panasonic CT-30WC14 only works when I push the cable into the port and hold it. It has a bad connection. I was going to take the back panel off and see if I could connect to the port ...

Ad

...HDMI port. You will not be able to split them, but they do make a HDMI Switcher, allowing you to use your Xbox 360 as number one and your PC as number 2, w you cannot mix both at the same time. Hdmi ...

Question about Televison & Video

1 Answer

HDMI port on rear of tv Sky have tried new hd box and new hdmi leads still not working.Can you replace the hdmi port on tv? You could replace the HDMI port on the TV, it's no different than changing a

HDMI Ports on Toshiba Flat Screen TV stopped working The HDMI ports quit one after the other. Can they be repaired or replaced? That's highly unlikely!!! More likely is that the cable is having ...

Question about Polaroid Televison & Video

1 Answer

...HDMI port is shorted and dying.Just don't used that HDMI port.That the cheapest and easy way,just by pass that HDMI port.Other wise than u have to spend like $130 -150 to buy a whole refurbish tv ...

Question about RCA Televison & Video

1 Answer

HDMI port on my Scenium is going bad. For quite a while, it would occasionally turn people's skin blue. Pulling out the HDMI cable and reinserting it would usually correct the problem. Now, however, I

...only highlights if the a proper HDMI sources is connected to the corresponding HDMI port of the tv. Also check by connecting any other device which have and HDMI connectivity to the HDMI 2 port.

Question about Insignia Televison & Video

2 Answers

...hdmi port gets detected when you try in other hdmi ports.if not getting detected then it can also be fault in the hdmi ports.because as you said that hdmi port number 1 works.that means wires are ...

Question about Pioneer Televison & Video

2 Answers

...HDMI port to work. The Input 3 Componet videoworks, but when I unplug the componet video and put in HDMI port nothing works. I do have something else in the HDMI Input 1 port that works fine. Hi. To ...

Not finding what you are looking for?
Mitsubishi WD-73737 73 in. HD-Ready TV Logo

100 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1257 Answers

The Knight
The Knight

Level 3 Expert

76186 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...