Brother CS-6000 "handwheel hard turn sewing" Questions

...straight stitch machine. The motor is separate. Turn the handwheel hard by hand. Then it needs re-timing. https://www.allbrands.com/products/4031-yamata-fy8500-gc8500-high-speed-straight-lockstitc

...HANDWHEEL WAS HARD TO TURN AND MACHINE WONT RUN WHEN PLUGGED IN. I OPENED THE SIDE COVER WHERE HANDWHEEL IS LOCATED. FOUND THE BELT WAS DRIVEN OFF THE MOTOR. PUT ON THE BELT ON THE MOTOR, OILED THE ...

...handwheel feels really tight and hard to move. I cleaned it all, oiled the spots as per the manual and then rethreaded it- it started back up but then stopped again. Any help you could give me would ...

handwheel hard to turn and making a squeaky noise? A few weeks ago my serger was giving off a 'burning' smell. It then slowed down and stopped completely. I took it in for a repair & was told it had a

...turn Maybe this will help: My Janome 10000 has been sitting idle for about 6 months and can hardly... Janome 5700 handwheel stuck inside pulley stuck My sewing machine has suddenly slowed down its ...

...handwheel hard to turn? If so I would start with a good oiling. Take the top and bottom off and oil all metal on metal with some clear thin oil. May need to work that handwheel back and forth when ...

...handwheel is not suppose to be hard to turn when it's brand new.. I've been sewing for over 30 years & I wouldn't keep the machine, I'd take it back & get another that works ...

...wheel is hard to turn If the handwheel on your Bernina 707 is hard to turn, it most likely needs a good cleaning and oiling. Old oil dries and tends to get gummy, causing the moving parts to be

Handwheel very hard to turn on Pfaff 7530 sews more slowly than normal I THINK YOUR BELT IS OUT OF ALIGNMENT. THIS IS A DIFFICULT MACHINE TO WORK ON SO UNLESS YOU WANT TROUBLE YOU BETTER GET A ...

...day. Next day, pressing on foot pedal the machine sounds likes it's working very hard and won't sew. Smells too warm. Handwheel turns extremely hard. it would be a good idea to have the serger ...