Brother CS-6000 "bottom stitch loopy" Questions

Ad

...bottom stitch loopy and the hand wheel and needle jam? try a new needle try adjusting the top thread tension to see if that helps the bottom loopy stitch Check to be sure the loopy thread is in fact ...

Ad

Question about Sewing Machines

2 Answers

...bottom stitch Hi. I have an elna 792d and have a loopy bottom stitch. Top stitch is fine. All knobs are on 3 Loopy on bottom means the top tensions need to be adjusted. "All on 3 means nothing" These ...

Ad

Question about Brother Sewing Machines

2 Answers

...bottom very loose, so getting a horrible loopy stich Set the top tension as recommended by the mfg - this is usually between 3 - 6. Now re-thread the machine with the presser foot up and see if this ...

...bottom of the material and 2nd is i am not getting the zigzag stich...thanks for the help The loopy stitching is usually do to threading the machine with the presser foot down. Raise the presser foot ...

Question about Brother Sewing Machines

1 Answer

top stitches look fine, bottom stitches loose and loopy check your top thread tension, set to 3 or 4 if that doesn't help let me know

Question about Singer Sewing Machines

1 Answer

...tension on the top stitch looks OK, but no matter what I adjust, the bottom stitch is loopy. Any help here would be great! increase top thread tension slowly till u get similar stitches on both ...

...bottom tread come out loose and loopy First, check the stitching to verify that it is in fact the bobbin thread that is loose & loopy. Usually, loopy thread under the fabric is the upper ...

Question about Singer Sewing Machines

1 Answer

several times and no luck. The bottom stitches are loose and loopy. What should I do to fix the problem? FYI.. Loops on the bottom, problem is on the top.. Loops on the top, broblem is with the bobbin

Question about Husqvarna Sewing Machines

1 Answer

bottom stitches are loose or loopy, it's probably because the upper tension is too loose. Make sure you adjust the tension with the pressure foot down and turn the dial just a bit at a time. Good luck

Question about Juki Sewing Machines

1 Answer

loopy stitches on the back My serger was working fine and now it looks like the 3rd and 4th threads are off. I have rethreaded, played with the tension and cannot come up with a solution. Help! ...

Not finding what you are looking for?
Brother CS-6000 Logo

153 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Irene Tulloch

Level 2 Expert

498 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

PHYLLIS SMITH

Level 1 Expert

19 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...