Brother CS-6000 "bobbin clips" Questions

My top thread will not pick up the bobbin thread. It looks like the hook comes around too late to catch the loop of the top thread? It sounds like your machine is out of time. Search for sewing ...

i have a Singer Merritt 4530 and the black bobbin holder thingy came out. How do I get it back in without bending it. Do I need to remove the plate with a screwdriver? make sure the small silver clip ...

bobbin holder clips into (actually pretty easy, I clean ours yearly especially if fuzzy material like velour is sewn) and brush the fixed area out that the bobbin shuttle floats in then reassemble and

...bobbin case will not snap into place unless the shuttle/hook is seated all the way. There are most likely some clips that slide over to hold the shuttle in place. BERNINA 820 QE The high end sewing ...

is there a picture of how the bobbin case fits in the machine? particulary the lower right clip arm and the upper left metal foot looking part? The bobbin case is not secure so when i start to sew t ...

The top thread does not pull up the bobbin thread Is the bobbin thread through the needle eye? If not then it needs to be there. The top thread doesn't pull it. when you fill the bobbin bobbin thread ...

...bobbin holder and the hook to fit into the machine. The clips won't hold down the holder because something isn't lined up right..Help. Ok, hang on! This can get tricky! Remove the bobbin. ...

to click. That seems to have solved the problem. Hi,I just had the same problem; Thread snapping or bobbin thread bunching up.It was resolved by realising there is a 'clip' on the bobbin case,

...off, the half moon shape shuttle should fit in quite easily, put the gate back up and put the clips acrosss to hold it in, take the bobbin case by the latch with thumb and forefinger and pop it

...up lever seems to have a metal clip showing that I didn't see before and the machine bounces the bobbin when it sews. HELP doesn't sew very well either. The take up lever does have a little metal ...