Brother CS-8060 Computerized Sewing Machine "needle wheel" Questions

Ad

Question about Janome Sewing Machines

1 Answer

...wheel is not moving the needle at all Hi I was unable to move the needle at all using the hand wheel so was unable to check the alignment of the needle as you spoke of Check the hand wheel. There ...

Ad

Question about Sewing Machines

1 Answer

...wheel turns but the needle does not move. hi there, push or pull hand wheel clutch to engage motion of needle and shutter. if not check belt on downside of hand wheel open cover motor,loosen bolt ...

Ad

...or down. I have to move the wheel to get the needle up. Make sure you tightened the smaller wheel in the big wheel after making a bobine, if it is loose it deactivates the needle movement. Good luck

Question about White Sewing Sewing Machines

2 Answers

...needle to operate. This smaller wheel is needing to be in the loosened state to wind the bobbin. The needle should not go up & down then. Just hold the outside wheel & tighten the inner wheel. This ...

Question about Yamata Sewing Machines

1 Answer

...wheel towards you until needle at lowest position, watch the rotating hook, as you turn hand wheel slowly to raise the needle 3/16" the hook should be exactly behind the needle and be just above the ...

Question about White Sewing Sewing Machines

1 Answer

...wheel disconnected the needle bar from the motor so you could wind the bobbin without running the needle up and down. It sounds to me like your machine has the same feature, but resistance on the ...

Question about Sewing Machines

1 Answer

...needle, turn your hand wheel if still locked up or stiff. Remove your needle plate and remove all your threads both upper and lower. 4. Clean your bobbin area using a brush take a deep breath then ...

Question about Brother Sewing Machines

1 Answer

...wheel forwards until the needle is bottom dead center.- Turn the hand-wheel forwards until the needle raises 2.2mm from bottom dead center.- The Hook on the shuttle should now be directly behind the ...

Question about Singer Sewing Machines

1 Answer

needle hits the wheel under bobbin My needle is hitting the wheel underneath the bobbin. It's as though the wheel is not turning in time with the needle lowering. Before I realized what was ...

Question about Yamata Sewing Machines

1 Answer

will not go up and down. Do you have any idea what could be the matter? I really appreciate any advice you can give. Thank you. Tighten the inner knob on hand wheel to make the needle move up and down

Not finding what you are looking for?
Brother CS-8060 Computerized Sewing Machine Logo

102 questions posted

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Bade

Level 3 Expert

1818 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...