Baby Lock Ellure "upper thread" Questions

...upper thread tension. Most likely the upper tension is set too tight and is pulling the bobbin thread up. Loosen the upper tension and try again. Tension is accurate when the upper thread and bobbin ...

...upper thread. RAISE the presser foot and rethread from the beginning. (This opens the tension disk so the thread will seat properly.) Set the upper tension to the midway point between high & low ...

Upper thread won't pull up lower thread My machine jammed after I ran out of upper thread without noticing. I cleared the jam, re-thread the machine and now the upper thread won't pick the lower ...

...upper thread breaks. Have you tried loosening the upper tension? Remove the upper thread, RAISE the presser foot and rethread from the beginning (make sure it follows the correct thread pathway). ...

...correct when the upper thread and bobbin thread meet in the middle of the fabric. To bring more bobbin thread up, tighten the upper tension. To bring more upper thread down, loosen the upper

...upper thread that is knotting under the fabric. Usually, it is the upper thread, which means the problem is most often the upper thread. Install a brand new needle. Remove the thread. Use only good ...

...Thread upper looper first. Pull thread through tension knob. Don'tjust lay it there. (She thought that is what I must have done) Orange Thread lower looper next. Pull thread through tension knob as ...

upper thread keeps breaking The most common cause of upper thread breakage is incorrect threading. Remove all the thread, install a brand new needle, RAISE the presser foot, and then rethread from the

...upper thread. (Make sure you are using a brand new needle.) RAISE the presser foot and rethread from the beginning. Verify that the thread pathway is followed correctly. Set the upper tension to the ...