...bobbin case to get out a stuck thread, then inadvertently put the bobbin back in the case without pushing the bobbin hook cover back. Now I can't get the bobbin out of the bobbin case. take a small ...
...bobbin case slot and under the tension spring .. put the bobbin and case over the shaft that is in the main unit .. the open side of the case goes in first .. make sure the bobbin doesnt fall out .. ...
Question about Brother Sewing Machines
...bobbin. Now, the casing won't go back in correctly. How do I insert it? I pulled the bobbin casing out with the bobbin when I threaded the bobbin. Now, the casing won't go back in ...
Question about Singer Sewing Machines
...bobbin case and cannot get it back in! First make sure that the bobbin case locking lever is fully back, away from the bobbin case area. This lever is on the left side and to the back of the bobbin ...
Question about Sewing Machines
...bobbin case on my mums sewing machine as the thread had come lose and the bobbin case a large metal bit the bit the bobbin case sits on and a black metal bit fell out what should i do? No worries. ...
Bobbin Case While trying to put bobbin into bobbin case the entire bobbin case came out of sewing machine. Now I have removed the metal plate and am unable to place bobbin case back into my sewing ...
bobbin case back in on my singer hd 110. It came out on it's own. The manual is not very helpful. If this is a vertical/metal bobbin case; raise the needle to it's highest position. This will position
...bobbin case My mum bought me this machine brand new- and after a few hours of use the bobbin case is not sitting in the metal casing tightly, causing the thread to loop and bunch up around it, and on ...
...bobbin case holding in place right? See if you can jiggle it back and forth to see if it moves. If it does move, it may have unattached itself in it's inner-casing. My bobbin case would just go back ...
Question about Singer Sewing Machines
...bobbin case is broken..i have purchased it but don't know how to install it I believe that is top loading Apollo bobbin case if so, facing the front of the machine underneath bobbin cover/door there ...
600 questions posted
Usually answered in minutes!
64 Questions
168 Questions
165 Questions
144 Questions
