Question about Sewing Machines
and your top tension is far too loose. video on threading and setup https://www.google.com/search?q=Viking+topaz+40 Thread tension explained. https://www.artisanstitch.co.uk/sewing-machine-tension/ .
...loose tension? The tension on my Bro. cs6000i is too loose. The bobbin thread is showing on the top, and the bobbin side of the fabric is very loose Sound like your top thread tension is loose try ...
Question about Janome Sewing Machines
...on the bottom of my sewing What is wrong and which tension needs adjusting Loose on bottom is usually caused by too loose tension on top thread, check top tension and thread is in the tension
...tension Loose upper thread requires the top tension to be increased (higher number). When threading the top thread, be sure to ALWAYS RAISE the presser foot while threading so the thread will seat ...
...tension is loose and I can't figure out why - the needle tension is fine but when i turn the garment over the understiching is loose - please help that means your top tension is incorrect, be sure to ...
Question about Husqvarna Sewing Machines
...close when the presser foot is lowered. If the stitches are loose on top it could be that your bobbin tension is too loose... If the stitches are loose on the bottom it's usually the top
Question about Toyota Sewing Machines
...loose tension and is making big loops rather than tight stitch..... .. The tension on the thread is too loose. However, first, verify that the thread is completely seated in the tension mechanism. ...
...correctly, then check that top tension as I said above. You can also check that the bobbin tension isn't too tight but it is most likely the top tension is too loose when it looks that
Question about Sewing Machines
...tension too loose. FYI--be sure to ALWAYS RAISE the presser foot when threading the upper thread so it will seat properly in the tension disks. If the bobbin thread is loose, then the bobbin tension ...
...on pfaff long arm really long loose stitches on the bottom You need to get the tensions set correctly, sounds like either you have not gone through the tension discs or the top tension is too
146 questions posted
Usually answered in minutes!
175 Questions
46 Questions
36 Questions
24 Questions
21 Questions
