Elna 2007 Mechanical Sewing Machine "oil bobbin winder" Questions

Ad

Question about New Home Sewing Machines

2 Answers

...oil the area where the bobbin winder shaft goes through the bobbin winder assembly. You might need to force the winder to turn with your fingers for a while, but it will begin to turn smoothly once ...

Ad

Question about Brother Sewing Machines

4 Answers

...bobbin winder may be frozen. Add a couple drops of sewing machine oil then let the oil penetrate for about 5 mins. Get a pair of pliers then carefully and lightly turn the bobbin winder until freely ...

Ad

Question about Sewing Machines

1 Answer

...oil, put top back on and bobbin winder does not work. 1. Take the top off. 2. Check to see if the bobbin winder has pressure as you move it back and forth. There should be. If not then check for a ...

Question about Bernina Sewing Machines

2 Answers

Bobbin on Bernina 807 won't wind? Please follow the logic checks and possible corrections: 1. Check the winder shaft for a sticking or a stuck condition. If stuck or sticking, add a drop or two of ...

Question about Singer Sewing Machines

3 Answers

...bobbin winder, despite the oil I'd given it. Once it ran long enough, the oil worked in and the gunk worked out, and then it was fixed. Looking back, there was no reason to remove the duct tape from ...

Question about Husqvarna Sewing Machines

1 Answer

...bobbin winder won't disengage. when you press the pedal down the needle doesn't move but you can hear the bobbin spinning but when you put a bobbin on the bobbin winder it doesn't move at all. Any ...

Question about Brother Sewing Machines

3 Answers

...bobbin winder may be frozen. Add a couple drops of sewing machine oil then let the oil penetrate for about 5 mins. Get a pair of pliers then carefully and lightly turn the bobbin winder until freely ...

Question about Sewing Machines

1 Answer

bobbin winder stopped working , It doesn't turn to wind the thread Either the winder rubber has worn down, or there may be some residue on the winder rubber, ot the winder may have seized through lack

...oil on the the metal shaft of the bobbin winder if it is not moving freely. The grinding noise implicates the winder tire may be ground from the locked winder shaft. The needle not disengaging ...

...oil or spray lithium grease and it should work fine. Spin the bobbin shaft by hand (not the hand wheel) to get it freed up after oiling. You can oil from the top and should take off the side case to ...

Not finding what you are looking for?
Elna 2007 Mechanical Sewing Machine Logo

215 questions posted

Ask a Question

Usually answered in minutes!

Top Elna Sewing Machines Experts

Kelley Buchanan
Kelley Buchanan

Level 2 Expert

130 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Elation Relation

Level 1 Expert

7 Answers

Are you an Elna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...