Elna 2007 Mechanical Sewing Machine "full zig zag" Questions

...zig zag model how do we set timing on singer t & s zig zag model 626 serial 756? we have replaced gears and are unable to set timing Email me and I will attach full instructions ...

...zig zag mode on singer 457 stylist and will not move to full left with the position lever Have you changed your presser foot over to the zig zag foot? On some machines it won't work correctly until ...

...zig zag. Why? It is likely that your elna graph gear is broken. remove thread from machine and open door to where you put cams in. Step on pedal and run at full speed. It the mechanism where the cams ...

...zig-zag stitch width so the needles do not hit the presser foot or stitch plate. I'd suggest installing the double needle and then carefully hand rotate the handwheel to see if the needles will hit ...

Kenmore 1762 Zig Zag I'm having trouble with my bobbin fill all way up on the bobbin winder Stop it before full

...zig zag stitch Firstly will it sew any stitches that require the needle to swing from side to side? the serpentine stitch or blind hem stitch?As this machine is now 20+ years old (but a beautifully ...

...ZIG ZAG Does it have a Stitch Width control? If not, it is probably a limited stitch only. Most Tacsew machines are made for high speed industrial sewing and frequently are made to perform a limited ...

...zig zag stitch on cotton, but recently the stitch has appeared on the wrong side of the fabric - that is the side that I am looking at shows the back of the stitch, and the correct stitch is hidden ...

full speed. For instance,the 3 step zig zag will stop and just do a straight stitch. Try to sew straight on the left and then on the right as far as your sewing machine will sew. If the sewing machine

thread as the upper bobbin and that you push all the way on the lever when sewing back and also, go full speed as this happened to me and that was my mistake. Hope this will help you :