Husqvarna Husky 165 "upper looper huskylock computerized" Questions

upper looper first then the lower looper, but the lower looper will not stay on top of the upper looper. Any suggestions? I have had this happen before and made sure the lower looper thread was on top

...to work. It is not making the connection of the top threads and the bottom one. I have the upper looper threaded and A & E Needles and have them set on 6, 7, and 3. What am I doing wrong? ...

...upper tension looper thread by turning the dial to a lower number. The upper tension looper is to tight and pulling the lower looper thread up. Also might want to loosen or tighten the left or right ...

...would. When you rotate the handwheel through a revolution you should see the upper looper pick up the lower looper thread where the converter meets it. It will then be carried up to the

...Upper Looper problem... Just found this awesome forum, hopefully someone can help. My Huskylock 910 completely froze up the other night, I couldnt even get it to budge by hand. So, I removed ALL of ...

...upper looper is broken so should get it fixed or just get a new machine. does it still have warranty Doubtful that it's under warrant or that this is something you can fix yourself. Get a repair ...

upper looper broke and snapped in half during sewing upper looper snapped in half check with your authorized viking dealer.

...huskylock 910 Most sergers/overlockers will come with a tool kit including a small flat blade screw driver and a set of tweezers. Both are needed to change a needle along with a steady hand and ...

upper looper shaft heats up with use. This the swells the metal and seizes the machine. This is always hard to fix right because there are many points on the serger that need regular lube and can heat

looper that may be allowing the upper and lower to cross when they meet. You do not want to break on of them. If it runs for a few minutes and starts to drag down slowly until it stops, the problem is