Husqvarna Lily 540 and 550 "slipping needle sewing machine" Questions

...needle every time it starts to sew, if I stop the machine and pull a little bit of thread out then it does NOT slip and sews perfectly I'm using a TOYOTA ESP9000 embroidery machine Make sure that you ...

...Make sure you are using a brand new needle made for the type of fabric you are sewing. Could be that the belt is slipping on your machine. You may want to take it for a checkup. All About Needles

...sewing fine and all at once it is like the needle is hitting on someething and will not sew. Can you help? Check that needle has not bent or has slipped down from its normal position. Remove bobbin, ...

...sewing! This will bend needle. The feed dogs move the fabric for you so your job is to GUIDE the fabric, not pull or push it. Some sewers don't even realize they do this and they create unnecessary ...

my needle is hitting the face plate and breaking how can I adjust the needle bar? Make sure the needle is all the way up in the shaft/bar. It can work loose and slip down. Make sure you're installing ...

slipping sewing machine simplicity The needle will go up and down if I crank the wheel by hand. But whenever you go to push on the power pedal, all you get is a slipping belt noise. Was working with a

...needle threader for a plus 1 viking sewing machine If it's the viking needle threader that was made for this machine, you would mount the needle threader over the needle screw. The part that fits ...

sewing machine's needle holder has got very loose and i can't stitch any of my clothes.any suggestions? the needle holder of my sewing machine suddenly got loose and now with my sewing machine i can't

...sewing machine needle will work just fine. They are all interchangeable. What's important is which needle to use with which fabric: For knits, use a ballpoint needle. The rounded point slips between ...

...sewing machine model 2932. Needle bent while sewing thick fabric. Had to break needle to remove. Handwheel won't move. Could this be a timing problem and can I fix it? Sounds like a belt