Husqvarna Lily 540 and 550 "presser bar lifter" Questions

Ad

Question about Singer Sewing Machines

1 Answer

presser bar lifter What is the order of removing screws and parts to get to and replace the broken plastic presser bar lifter. Presser bar litter of my sewing machine is not working. How come i fix it

Ad

Question about Brother Sewing Machines

1 Answer

...presser bar screw on top of the presser bar, if you have a dial turn it to 0, you should now be able to move the lever, if it is still tight put some WD40 on the presser bar and leave it for a couple ...

Ad

...with broken presser bar clamps (something inside the head). If it is just a bind then some oil on the presser bar may work, if the clamp is broken then it is probably not worth fixing. Good

Question about Kenmore Sewing Machines

1 Answer

...apart to the point where you can see the pivot point for the presser bar lifter and spray WD40. Let sit for a few hours and try again. Repeat until the presser bar lifter releases. Sewing Machine ...

...of the lifter the foot won't fall back down..will come down if you gently pull it Sounds as if the spring for the presser bar is broken OR the presser bar is dirty and needs cleaned and

...presser ft. the lifter bar connected to the knee lifter can be bent to line up with the bar on the machine. go to the other side of the machine and look in thru the oil pan to see how they match

...presser bar lifter arm is broken off of my 1222E pfaff sewing machine can it be replaced It is an industrial make and still very much in use. Try these people 'Presser Bar Lifter' is there for $23! ...

presser bar lifter? I ordered a replacement part, but now I don't know how to remove it. How do I change a pfaff 1222 presser bar lifter? I ordered a replacement part, but now I don't know

Question about Husqvarna Sewing Machines

1 Answer

...presser bar lifter on my Lily 540 broke and now the presser foot stays down permanently. The plastic portion of the lifter (the lever) that is located on the outside of the machine is intact. It is ...

Question about Singer Sewing Machines

1 Answer

...presser bar lifter & lift it up, if you look close it has a small notch under the front place the all purpose foot down under the presser bar, make sure the presser bar notch get on to the pin ...

Not finding what you are looking for?
Sewing Machines Logo

67 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

radcal

Level 2 Expert

196 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

sewcrazyshan

Level 1 Expert

19 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...