Husqvarna Lily 540 and 550 "drive adjustment" Questions

...to adjust the timing of the hook.  Maintain regular sewing machine repair. Look for the lower drive mechanism.  It may be a lower shaft with gears on either end. If this is the case, look ...

how do i adjust the number of beeps for a thread break on a Tajima c1501. 10 is driving me nuts. I can't find anything that says that is adjustable.

My needle bar driving arm on my Singer 457 has no tension. Without tension I cannot adjust the stitch length or needle position. Unthread the machine, RAISE the presser foot, and re-thread from the ...

How do you adjust the tension Tension is adjusted with the tension dial on the right side of your machine.You would adjust the tension to your comfort. Use a piece of material to practice on, and ...

...belts that serves to drive these machines but not without some problems as they are usually wider belts and don't fit the pulleys well. In this case some adjustment will be necessary. SewTechnical ...

...to the bottom. Of control......turning the adjusters left or right will Excellerate or decrease the drive speed.of left or right traxs or ...

singer 360 belt drive wont turn I have a singer 360. The belt drive that turns the bobbin does not turn with the needle. I can move the belt/bobbin craddle by hand a little but not a full revolution. ...

drive belt How can I tension the drive belt on a Bernina 707? I have taken the side off but I don't know what the adjuster looks like and what do I do with it when I do know what it looks like? Thank ...

at what degree should i adjust the main shaft for adjusting the needle bar driving CAM? adjusting needle bar driving cam WHEN THE MACHINE IS SET ON THE LONGEST STITCH THEN AS THE FEED DOG GOE UNDER ...

...adjustment location(s)? the drive belt is normally a cog type belt inside the head of the machine I would be looking in that area and at the belt or at the tension of that belt may be a service ...