Juki TL-98Q "sewing machine picking bobbin cotton" Questions

it still does not pick up the bobbin thread, the needle/hook may be out of time, requiring service. Sewing Machine Needle Not Catching Thread Sewing machine won pick up bobbin thread hook timing fix /

...machine top & bobbinmake sure the bobbin is inserted correctly into the bobbin caseif none of these suggestions work, then it's possible that the machinecould be out of time & would need ...

machine the top thread is not picking up the bobbin thread. I have checked the threading and redone, cleaned but still not picking it up. Most likely a timing issue. the needle hook and needle are not

...sewing machine timing. ... Completely pull the thread and bobbin case out. Rethread the thread and the bobbin. If it still doesn't work you may have a timing issue, and should bring it to a machine ...

...bobbin The machine skips and does not sew? The top cotton does not pick up the bottom cotton. Might be a silly question but is your machine threaded correctly? Are you using a new needle, and new ...

...sewing, have threaded my bobbin, installed it in its casing, and threaded my machine. But when I take the needle down to pick up the bobbin thread, nothing happens. I've taken the bobbin out and ...

...up and down and doesnt pick up the bobbin cotton the hand wheel just spins and doesn't turn the needle up and down ,and doesn't pick up the bobbin cotton possibly needs new belt or belt

picking up the bobbin cotton the first thing that comes to mind, is to refill the bobbin and then re-thread the machine. you have probably already done this, so next I'd check to see if your using the

...bobbin ,re threaded machine now it wont,pick up bobbin cotton.It is same cotton as I was using on the curtains,can anyone suggest anything I dont want to spend another load getting it sorted if I ...

...picking up the bobbin thread. Verify that both upper and bobbin threads are threaded correctly. If so, and it still fails to pick up the bobbin thread, most likely there is needle/hook timing issue. ...