Necchi 6015 Mechanical Sewing Machine "threads bottom looping" Questions

the fabric back in without touching anything it went right back to looping the bottom thread. FYI---- Loops on the bottom-- problem is in the threading.. Loops on the top--- problem is with the bobbin

thread loopy on top what causes the thread on top to loop up? the bobbin or top threading?? It's loose but the bottom looks great General rule of thumb:: loops on the bottom, problem on the top. loops

...looping on the bottom, then your problem is on the top. Pull the thread out of the needle and and put the presser foot down. If the thread pulls thru easily, then you need to rethread your machine ...

...threads. You say the bobbin thread is looping. Is it looping in the bobbin area or on the bottom of the fabric? If you are getting loops on the bottom of your fabric, it is a tension problem with the ...

Looping on bottom: Great description, that helps a lot. Big loops are actually easier to solve usually. 1st know this: Loops on bottom means the top is too loose or the bottom is too tight. With loops

...looping on the bottom threading the machine and the thread has hundreds of loops on the bottom. Can't get it to sew a straight line with all that thread underneath. Thread looping on the bottom means ...

...threads on top of the seam? Or do you mean you see loops on the bottom under the fabric? If your loops on the bottom, that means the top tension is too loose, you've not remembered to put the presser ...

...bottom of the lower thread stitch. If the lower stitch looks correct and not bunching, you will need to change the tension on the upper stitch. Make sure that your threads are firmly inserted within ...

...bottom stitch. Hello You would pull out several long lengths of matching thread from my spool of thread and knot the threads together at one end (to hold them together). Grab the knotted end of ...

...Bottom side loops are very loose. How to adjust? Looping stitches can be caused by a few different factors. Make sure that your machine is threaded correctly. If the top thread or bobbin thread is ...