thread gets knotted around the bobbin case and locks the machine up. How do I fix this problem? hello, I had the exact same problem and could not find the solution until i took my machine to my sewing
...thread is getting caught on the bobbin instead of clearing around it. This means I end up with many threads coming up from around the bobbin. What's happening??? Thanks, Cara. check to see if your ...
Question about Juki Sewing Machines
...thread is not caught or looped around any of the machine's components. Try using a different type of thread. Some threads are more prone to breaking or getting caught in the machine than others. If ...
Question about Singer Sewing Machines
...thread is winding around the bobbin case. It seems to get caught under the bobbin case retaining plate, around the left side of the case,& under the rim of the position changed bobbins, changed ...
...thread gets caught around the bobbin case and i was wondering if the bobbin needs the metal case for it or not. I have a elna supermatic sewing machine, serial number 62DF332681. the last known ...
Question about Kenmore Sewing Machines
...thread gets caught on crescent piece holding in bobbin case When I first start sewing, the needle will drop and pull up the bobbin thread, but on its second plunge, it starts to get tangled up not ...
thread caught in bobbin housing of a janome 11574 I follow the exact instructions given in the manual but when I get to the part about catching the bobbin thread, it get caught around the bobbin ...
...thread gets caught up on bobbin. the string gets wrapped around the bobbin then breaks the thread. it seems as though the bobbin is sitting a hair too high. ? ? ? Make sure there is no fluff/lint ...
...thread (from the top) gets caught up in the tools around the bobbin until it becomes so tight that it completely and quickly halts all sewing. I've tried adjusting the tension, but it doesn't seem to ...
Question about Sewing Machines
...thread is caught I have been using my futura 350 with no problems...until now. I don't know what I may have done, but the upper thread is catching in the bobbin area-not where the area where the ...
72 questions posted
Usually answered in minutes!
111 Questions
91 Questions
75 Questions
44 Questions
29 Questions