Question about Singer Sewing Machines
...thread wraps around the lever on the bobbin case and the bobbin case moves eventually. Singer 7258.CL Remove your bobbin case and inspect it for any damage. Scratches, holes, snags. Sometimes you can ...
...remove it for the Singer Simple 3116. Evidently the lever fits more than one model. How To Reverse Stitch On A Singer Sewing Machine Correctly Step 1. Press the reverse button Refer to the Singer ...
thread from the bobbin Remove bobbin and be sure the bobbin thread is correctly placed into the machine. Put fabric, place feed dogs up, pressure lever down, hold the thread from the needle and stitch
Question about Singer Sewing Machines
...remove the auxilliary bed. Attach the embroidery bed and push the lever on the front of the bed to the right. Switch to the embroidery presser foot. Thread the machine with the appropriate embroidery ...
...thread takeup lever is at its upper position, c) Lift the presser foot, d) Remove the material backwards (away from you), e).Cut the threads 6-7cm long. Now your machine is ready for the next cycle. ...
...3 or 4 is good rethread the machine top thread & bobbin some machines jam when the thread come off the thread take up lever--I have to watch my mechanical sewing machine for that ...
...thread the bobbin if I can't remove it. Ok which is it? A Singer or a Necchi? If it is a Singer or a machine like the one picture here.... slide the grey metal plate toward you. You'll see the "drop ...
...thread that are wrapped very tightly around the bobbin case... What am I doing wrong? Unthread the machine completely, remove the bobbin. Make sure that the bobbin case is securely in its place. Turn ...
Question about Singer Sewing Machines
Remove the upper thread, RAISE the presser foot and rethread from the beginning. Verify the thread path is correct. Set the upper tension to the midway point between high & low number to start and
Question about Singer Sewing Machines
...lever is in the up position. If it continues, once threaded and with the presser foot down, pull on the thread through the needle. If it has resistance, it is threaded properly. If it pulls easily ...
72 questions posted
Usually answered in minutes!
111 Questions
91 Questions
75 Questions
44 Questions
29 Questions