Necchi 3102 Mechanical Sewing Machine "pfaff bobbin thread jamming" Questions

...Pfaff. I hope this helps! If you are able to totally remove the bobbin cover/stitch plate, please do so. Ideally, there will be one or two screws holding it in place. remove the bobbin carefully ...

...pfaff 2040 and when the needle goes down to pick up the bobbin thread the main thread wraps around the bobbin housing and jams. Doesnt grab the bobbin thread. How can I fix this? Be sure to use a ...

...Pfaff creative 1475cd. Hello Roz If there is some thread caught in the bobbing case area, the best solution is to remove the bobbin case and disassemble the bobbin case area. This is shown on page 16 ...

tried new needles and threads and adjusting tension. it seems to get caught on little metal piece at front of bobbin casing. Had a similar problem with our Pfaff. Needed a replacement cam. broken gear

...bobbin area, re-threading the top thread, turning my Pfaff 4.2 off and on it still said " remove thread jam under the the stitch plate". I pushed the "ok" button and it started working again. Keeping ...

...bobbin of my Pfaff 1540. It sewed ok. Then the next time the needle rotated down into the bobbin case area it jammed. The only way to free the mechanism was to remove the needle. Without a needle the ...

pfaff select 1540 bobbin thread jam bobbin thread balled up and I had to remove the needle, the foot and cut threads to remove the bobbin case. one thread is still caught in area the bobbin case goes ...

...Pfaff 2034, bobbin loops I have a Pfaff expression 2034, I have a continuous problem with the tension. The bottom (bobbin) stitch gets all loopy, over time I have to tighten the tension (know in side ...

bobbin thread jam a thread is jammed in the bobbin compartment. it broke off and i can't get it, can't really see it, but my entire machine is now jammed. i'm desperate. You can remove the thread jam ...

...Pfaff QE4.2 is a nice machine. You must be sure you are using it correctly. Damage to the machine can result if you are not following the operation manual correctly. If the bobbin is dropped in ...