Necchi 3102 Mechanical Sewing Machine "needle hits base" Questions

...needle hits the base plate about 1mm on the far side of the hole. You may have the stitch setting on the left/right(depends which side it hits) setting, or the needle is un-noticeably bent. Depending ...

...needle hits the base plate The needle hits the base plate about 1mm on the far side of the hole. sounds like a bent needle. did you try changing it to a new one? I have gotten bent needles new in ...

...needle in the base plate it how do I centre the needle in the base plate it seems to far forward and is hitting the base plate and breaking needles I think you may have put the timing out. You will ...

...needle is hitting back left side of the base plate. Also turning dial to switch between positions 2 & 3, the needle doesn't move left to right. Is this a linkage problem ? Adjust the metal plate ...

the rest of the bobbin Hits the needle, then it is a timing issue! Loosen the 2 set screws behind the bobbin to adjust the timing so that the neddle is up when the wider part of bobbin holder comes by

...base plate, I mean the metal piece that the needle passes through when it goes down through your cloth and through the hole provided...This sounds like why it's breaking, I think your needle is ...

...model 385.16221300 when the needle goes down it goes to far and hits the base on the bottom Have you tried to take the needle out and reset it? Sounds like you don't have it far enough up in the ...

...needle hits the base plate of the zipper foot, it works fine on the right side but not on the left, am I able to move the needle shaft across somehow Depends on your machine. Some machines have the ...

I have necchi 575 FA sewing machine and thread keep breaking and the needle is hitting the base when i sew Help Change the needle. It sounds as if it has been damaged and bent.

...needle is hitting the base plate I am sorry, I am not sure what you have already tried...Your needle may be mounted incorrectly, it may not be mounted all the way into the channel before the ...