Necchi 3102 Mechanical Sewing Machine "lock needle move" Questions

lock, inappropriate needle position, after broken needle Broke a needle, the error comes on main motor lock... Then inappropriate needle position... Can't move any of machine- race for that needle won

lock up while sewing the needle want move up and down it is a grace it says error 6 can you help me thank you Sewing Machine: Needle won't move A disengaged clutch, broken drive belt or internal drive

Lock Ellure Needle stays on the left and I can not get it to center or move to the right. Make sure the needle is at its highest point. Use the flywheel/ hand wheel on the right side of the machine to

...needle wont move? HELP the wheel seems locked and when i move it it jumps into place and locks I'd guess there's still thread in the hook. Try removing bobbin and case and clean area per machine ...

...lock.(sometimes front) e. Turn hand wheel by hand. Did the needle rise and fall? 2. The drive belt isn't moving the shaft. a. Remove the top of the sewing machine. b. You will most likely have to ...

I have a juki ddl 8700 machine all of a sudden it stop working. Every thing is locked and is not moving at all. What should I do? Please help. Answer to 8700 locked up. I had a Juki 8700 do this. I ...

entire needle clamp from the needle bar to see if something is causing this. try undoing the lock screw fully and gently move the clamp in the opposite direction the the lock screw, it should drop off

needle position won't lock in When I'm sewing if I pull a little to either side the needle moves to that position. When the needle is raised, I can move it easily from side to side. Any ideas? Sounds ...

...lock bl6150 Most sergers have a color guide. On my serger, the curved needle is threaded first, then the other bottom needle, then the top needle(s). The bottom horizontal needle is a trick, as you ...

...needle?? Baby lock Quest Plus ManualsLib has the manual for the BabyLock Quest Plus (BLQ2-PL) here: ...