Necchi 3102 Mechanical Sewing Machine "lever raises foot" Questions

...foot lever should stay raised, this sounds like the spring has broken in your machine. if you are comfortable with delving into the machine you could open it up and take a look. alternatively take it ...

foot lever release the foot by raising the lever located at the back of the presser foot assembly place a different presser foot on the needle plate so that the bar on the presser foot is in line with

...raised when I raised the lever but when I put the lever down the pressure foot stays in the raised position. I do not know what to do. Thanks Move your handwheel towards you so that it can come

...the presser foot lever? That lever raises and lowers the presser foot. If you are talking about the feed dogs, there is usually a lever to raise and lower the feed dogs. Consult your owner's

...Foot and raise its Lever. Keep the lever raised and hook the walking foot around the shank / presser bar. Slide the foot up and down until you've lined it up with the hole, so that you can insert the ...

...needle bar and presser foot. I've tried everything, can anybody help? Hmm. Raise the foot with the presser foot lever. You have to raise the foot up to get the fabric under the foot in order to

...foot lever, and then slide the drop feed lever. Set the lever in the. position for normal sewing. The feed dogs can not be raised only by sliding the drop feed lever to . Raise the feed dogs as ...

...foot lever. 5.Lower the buttonhole foot lever so it is positioned behind the raised finger on the foot (see step 5 illustration). a Note:Machine will not start to sew if buttonhole lever is not ...

...lever raises a collar around the main shaft. There is a screw in that collar which connects the collar with the shaft. If that screw is loose the collar will not raise the shaft. Caution: Tighten the ...

Most machines, stop when you raise the foot, but then you can raise it higher but putting more upward pressure on the foot raise lever, the foot will go higher. Give this a try. Thanks for using Fixya