Husqvarna classica 100 stuck in reverse stuck in reverse I found a Classica 90 that wouldnt reverse. When I took it apart I realized the stitch width mechanism was stuck. The reversing mechanism ...
Question about Singer Sewing Machines
Will not zigzag or decorative stitches. New to these newer plastic style machines Always used older steel machines. This was given to me my by my sister who used it very little. Could cam be broken? ...
Question about Necchi Sewing Machines
Necchi Lydia 3 544 Bobbin mechanism will not fully disengage to allow a return to sewing. When you wind a bobbin the machine will not sew automatically the mechanism for this has a tendency to not ...
Question about Husqvarna Sewing Machines
viking 6030 stitch width is not working. It does not move right to left and back for decorative stitches and is very narrow If it's a mechanical machine, most likely the stitch width mechanism is ...
Can anyone tell me if the Elna 3007 sewing machine is electronic or mechanical. Mechanical. Here is an overview - http://www.oksewingandvacuum.com/3007.htm It's not correct to say that the 3007 is ...
Question about Sewing Machines
Why doesn't the lever that raises the presser foot release the thread tension? The mechanism that the lever is supposed to operate does not even touch the tension parts. The arm that actually goes to ...
Problem in Motor as well as Mechanical Cam System I have this Nechhi Mechanical Sewing Machine for the last many years. The Motor got burnt and the Mechanical Cam System has completely stopped working
Question about Juki Sewing Machines
I have a JUKI HZL - DX7. There is a problem with the automatic thread cutter. The automatic thread cutter works but a short piece of thread is left in the mechanism after each cut. After a while the ...
Question about Brother Sewing Machines
the whole needle mechanism came off - how do I get it back on? Hello, I was sewing & all of a sudden the whole mechanism came off. I've tried to get it back on & I start it & it comes ...
Model CG-550. Needle hits a bottom plate. All thread and bobbin removed. Took the feed cover off. Do not see the problem. Possible bent or wrong needle. If ok, check the zig-zag mechanism to see if it
125 questions posted
Usually answered in minutes!
111 Questions
75 Questions
56 Questions
44 Questions
29 Questions