Question about Sewing Machines
...bobbin thread evenly. What is wrong? I'm not sure that any of my machines thread the bobbins evenly, even the newer ones. When winding, I just use a stylist, pencil, or other item to move the thread ...
...I don't think any machine really winds well. What I do is hold the thread about an 1" away from the bobbin. start to wind and I guide the thread slowly up and down the bobbin so that it winds ...
bobbin and thread the tail through the hole on top of the bobbin. Place bobbin onto spindle on top of machine and then push it against the stop to engage the bobbin winding motor. HOld the thread tail
...want a really smoothly tensioned even wind onto the bobbin so your thread comes off the bobbin when stitching with even tension, not stretched, then loose. Hope this helps you with your
...the thread going onto the bobbin. The thread will not relax until unwound from the bobbin and stitched into your garment. It may cause the fabric to pucker as the thread relaxes. Slower is
...bobbin thread keeps breaking! It is very loose and then snaps?? I've replaced the needle to make sure it was sharp, I bought the highest grade thread I could find, adjusted the tension... then ...
...bobbin to hold the thread. Now place your finger or the handle of a pair of scissors onto the top of the thread spool to apply tension so that the thread winds evenly and slowly wind the bobbin until ...
bobbin thread keeps knotting 1. Do you mean that there are knots in the bobbin thread? 2. Is the bottom thread in your stitching looping and knotting. If yes to 1. you need to rewind your bobbin fresh
...bobbin by the thread tail and it should "stay" but you should be able to pull on it to release thread too. Adjust the little tension screw in minute increments to get this right. Bobbin case tension ...
125 questions posted
Usually answered in minutes!
111 Questions
75 Questions
56 Questions
44 Questions
29 Questions