Necchi 4575 Mechanical Sewing Machine "standard settings" Questions

standard settings that you need to worry about is the top tension and the bobbin tension. The standard factory top tension is the midway point between high & low numbers. That is the ideal tension

I need to know the correct 4 thread tention set numbers for standard serging. needles are 4 or 5 and the loopers at 4 is a good starting setting You are posting in the 910 section. If you have a 910, ...

..."Normal" is difficult to describe because it depends on the thread and fabric you are stitching. Standard straight stitch setting for most standard fabrics is probably whatever will deliver 10-12 ...

settings on a white speedy lock 234DE serger Normal setting will depend on what you want to do with your machine. The standard factory tension setting is the mid-point of each thread dial. However, if

...quilting and it did not help. I need to know the regular tension settings for my machine. Factory standard tension setting is the midway point between high & low number. However, machines

...standard elna lock f4 thread tension settings five on all tension dials and stitch length between two and three for a normal 'marrowing' 4 thread overlock. at factory tension dials would all ...

...standard stitch? I have changed all settings but it keeps coming out with extremely small/tight stitches try this link for a ...

Why is the needle not in the middle of the standard pressure foot? bent , loose , machine in zig zag mode are possible reasons Some machines have the standard needle position at the left side (my old ...

...Standard factory settings are the mid-point of each thread selector. However, if you want to do any other special stitches, ie rolled hem, you need to consult the manual and set the dials accordingly ...

...for straight stitch on husqvarva topaz machine How to set tension on husqvarna topaz 50 machine The standard setting when the machine leaves the factory is the midway point between high & low ...