...hook and bobbin case by turning the 2 little black levers at the bottom right and left in the bobbin area, Once you do that, the circular piece that holds the bobbin mechanism in place can drop down ...
...bobbin case tension spring. With cover plate open hold needle thread and turn hand wheel towards you to see if hook picks up needle thread and passes it around bobbin case. if not check hook ...
Question about Singer Sewing Machines
...bobbin, case, hook assembly and retainer have come out simply turn the machine over so that these parts can be fitted downwards. fit the hook, then the retainer and lock it into position. Put bobbin ...
...hook. Place the bobbin case in the hook area so that it sits flush and does not bind when the handwheel is turned.Reinstall the needle plate, thread the machine, insert the bobbin and turn the wheel ...
...taking the bobbin case out of the machine and reinsert the bobbin case and see if that helps if not then the machine needs to be checked to see if there is something wrong with the hook and hook ...
...bobbin case and hook gently with a tooth bush or some such. Make sure the bobbin doesn't have a bit of needle jammed in it. Examine the bobbin case and hook, looking for any damage. There has to be ...
Question about Sewing Machines
hook and the bobbin case carrier. Remove the bobbin case and bobbin. You will need to remove two small slotted head screws and remove the half circle locking ring that holds the bobbin case carrier in
Question about Husqvarna Sewing Machines
...bobbin case from the top you will notice the hook. Think of the tip of the hook as a clock dial. At 12:00 the hook would be behind the needle. Turn the hand-wheel is at 10:00 this will allow more ...
Question about Singer Sewing Machines
...bobbin case from the hook race. Depending on the model of your Singer sewing machine, this may be a lever, a button, or a latch. Use your finger or a small screwdriver to press or move the lever, ...
Question about Sewing Machines
...hook (sharp thing) is under the bobbin case. If it truly isn't turning as you say then the bobbin thread will not be pulled up. This can only be fixed by a repairman. If the machine is a Husqverna, ...
107 questions posted
Usually answered in minutes!
111 Questions
91 Questions
56 Questions
44 Questions
29 Questions