Question about Singer Sewing Machines
...bobbin thread. Is this still timing Removed bottom of machine and fixed timing by adjusting wheel. when I spin needle when empty, the hook catches thread however it doesn't catch when bobbin case is ...
...bobbin thread, it may have a timing issue, ie the needle is arriving at the bobbin at the wrong time in order to intercept the bobbin thread. You can search the internet for web sites and videos ...
Question about Sewing Machines
...supposed to be cleaned but each time but it still breaks. I have removed the plate that covers the bobbin and cleaned the thread, but it continues to break. Bobbin thread breaks 1. There is a right ...
Question about Singer Sewing Machines
...bobbin thread still isn't picking up. Hook timing? Something else? It was working fine until about an hour ago. The hook timing is mechanically set. If all you used was your fingers, you did not ...
Question about Juki Sewing Machines
...moves in relation to the bobbin to see where and why it is not connecting.) You can search the internet for web sites and videos that discuss machine timing or you can take it for
Question about Janome Sewing Machines
...timing problem? cleaned the lint out of area and rethreaded bobbin several times - needle picks up bobbin thread to begin sewing but does not make a stich after that bobbin thread just piling up ...
Question about Sewing Machines
Pfaff 2024 bobbin case basket is jammed-even after clean & oil Problem started when needle jammed into bobbin area at the beginning of a seam. I have quality thread that match top/bottom & ...
Question about Sewing Machines
bobbin thread, there is most likely a timing issue, ie the needle is arriving at the wrong time to intercept the bobbin thread. Search the internet for sewing machine timing discussions or take it for
This machine came with a very limited Manuel. The bobbin thread is knotting up and not catching as it should. I've re threaded several times removed and reinserted the bobbin, but can't seem to find ...
...machine timing. ... Completely pull the thread and bobbin case out. Rethread the thread and the bobbin. If it still doesn't work you may have a timing issue, and should bring it to a machine
49 questions posted
Usually answered in minutes!
76 Questions
45 Questions
40 Questions
21 Questions