Simplicity Serge Pro SW432 Mechanical Sewing Machine "machine needle far left" Questions

...machine- needle position wrong I have a new Singer 1507 sewing machine out of the box and the needle is far to the left and when I press it to the right it will go into position but as soon as I let ...

machine, needle goes to far left position. All stitches seem to go to that position, straight or otherwise. When we try to stitch any kind of stitch, needle just stitches in place. This seems to be an

...needle position on this model? If you mean left or right with a straight stitch, then yes. You use the stitch width selector - you will notice a small raised section in 3 locations, they mark, far ...

needle screw too far out, just enough to get the needles out and in, as there is sometimes a ballbearing up in the housing between the two needles and if you wind out the screws too far, this may drop

problem. You can try to move the needle over with the stitch button and run you machine by hand for the first go. If it jumps back over - you are going to have to take it in to be looked at. Good Luck

...needle machine, you would have to buy something else. (Forget about any of the new plastic machines on the market. This Brother will out-sew and outlast them any day of the week.) On the other hand, ...

...far enough to be caught in the left needle stitches. Does anyone have experience with this problem? Is the left needle position ok to be 1/4" lower than the right needle? One needle does sit slightly ...

...machine is capable of zig-zag or swing needle sewing, it is sometimes possible to swing the needle and fix it to the left or right and fix it in that position. I suggest you check in your machine ...

...needle is entering the machine far to the left. The needle is in correctly and the bobbin plate has not shifted. It appears that the device holding the needle from above has shifted (it shifts easily ...

...machine the sequence is: 1 Far right thread spool goes to lower looper. 2 Next to left spool goes to upper looper. 3 Next to left spool goes to right needle. 4 Far left spool goes to left needle. As ...